Tag: brzgt86

FT86 Front Bumper Kits Now In Development….

Posted on by Jeff Pippy

FT86 Owners Rejoice! Your Bumper Gap is Gone

Move Over Racing’s Front Bumper Quick Release Kit is now available for the FT86 (BRZ/FRS) platform. Many owners have issues with Fender Line Gaps once the bumper has been removed and replaced. The 86 Bumper Kit takes care of your gap plus eliminates the need to remove the Side Marker Lights…they can stay put to save you time and frustration of dealing with the metal clips each time the bumper is removed. Simply push two buttons on each side and remove your screws and plastic clips from under the hood and underbody, disconnect a few wire connections, and you’re done

ft86 sample ft86 sample 3 FT86 QRK Billet FT86 QRK 1 ft86 sample 2 ft86 black on black

The Move Over Racing 86 Bumper Quick Release Kit installs in less than 1.5 hours with a difficulty of 5/10. Step-By-Step Instructions are Included with Kit

Tools Required are:

  • Drill with 7/8″ Stepped Drill Bit and 1/4″ Drill Bit
  • Dremel with Cutting Blade for Plastic
  • Plastic Measuring Tape or Digital Caliper
  • Needle Nose Pliers
  • Flathead Screwdriver (Large and Small)
  • Phillips Screwdriver – Stubby
  • 10mm wrench x 2
  • 10mm Socket and Ratchet with Long Extension
  • Punch and Hammer
  • Painters Tape
  • Grease or Similar to Mark Location of Latch Holes
  • Marker
  • Loctite
  • Touch-Up Paint
  • It is Recommended to Remove Front Wheels with Car Jack and Stands

This is a great mod for guys who track their BRZ/FRS or for the everyday driver who removes the front bumper often for mods etc while taking care of any misalignment in the fender to bumper attachments- this kit is a must have for 86 owners!  The 86 Bumper kit utilizes the OE fender brackets to mount our Pin Assembly and Custom Stainless Spacers that are adjustable for the rear latch. The front latch requires one 1/4 inch (0.250″) hole on each fender bracket is to mount

Dual latches on each side of the bumper keep everything lined up and held on tight with over 250lbs of holding force in each latch! They are made from 6061 T6 Aluminum. Mounting Pin Assembly is made from 304 and 316 Stainless Steel. More info and pics coming your way soon!

Contact moveoverracing@gmail.com