Tag: bumper kit

NEW RELEASE: Evo 8 and 9 Single Latch Bumper Quick Release

Move Over Racing has released our Single Latch Bumper Quick Release Kit for the Mitsubishi Evo 8/9. Special introductory pricing is in effect now..BUY YOURS TODAY !!!

Quick Releases Made From 6061 Aluminum

Available In Black, White, Blue, Red and Plain Billet Aluminum

Custom Brackets Made Specifically for Evo 8/9

Don’t Be Fooled By Imitations – Lifetime Warranty Included

mitsubishi, bumper, cz4a

Evo X Single Latch Bumper Kits Have Hit The Streets!

We our proud to offer a special edition Single Latch Bumper Kit for the Evo X (CZ4A)

Custom brackets include Evo “X” logo

More Images coming soon!!

20151211_234143 (1) 20151211_233959 (1)

This Bumper Quick Release Kit eliminates the plastic fender to bumper attachments along with the fender screw

Each Quick Release holds 150 lbs without failure for a total of 300 lbs holding force

Low Profile – Spring Loaded – Ball Bearing, Ball-In-Socket Quik Latch Mounting System

Please indicate color preference when ordering

 

Evo X Bumper Quick Release Kits – Dual Latch

Our Evo X Dual Latch Bumper Quick Release Kits are here!

08+ Evo X Mitsubishi Evo X Front Bumper Quick Release Kit

Also Fits 08+ Lancer and Ralliart Models

46 Piece Kit Includes Four (4) Quick Releases and Mounting Kits

Quik Latches are CNC Machined from 6061 – T6 Aluminum with Billet Finish

Brackets are made from 5052 Aluminum Alloy

Evo X QR Kit2 evo x kit hdr evo x kit varis evo x kit black  ww evo kit track tower evo x red tow hook and kit Evo X QR Kit

This Bumper Quick Release Kit eliminates the plastic fender to bumper attachments along with the fender screw

Each Quick Release holds 150 lbs without failure for a total of 600 lbs holding force

Low Profile – Spring Loaded – Ball Bearing, Ball-In-Socket Quik Latch Mounting System

Please indicate color preference when ordering

Mazda Speed 3 Front Bumper Quick Release Kits In Stock Now!

Move Over Racing is now offering their World Famous bumper quick release kit for the Gen 2 MS3 market. Using our same Quick Release setup as the STi and Evo applications, this kit utilizes a 5052 Aluminum Bracket to mount our Latch Pins and hardware. The MS3 QRK includes four quick release latches made from T6-6061 Aluminum and come in plain billet, black, red or blue.

ms3 black kitms3 kit white bigger ms3 billet 3 ms3 billet 2

Each quick latch holds up to 250 lbs before experiencing failure. The kit comes with a Lifetime Warranty against any manufacture defect..if something goes wrong simply send them back and we will replace for free

Pricing starts at $215.00 usd

Get yours today!

FT86 Front Bumper Kits Now In Development….

FT86 Owners Rejoice! Your Bumper Gap is Gone

Move Over Racing’s Front Bumper Quick Release Kit is now available for the FT86 (BRZ/FRS) platform. Many owners have issues with Fender Line Gaps once the bumper has been removed and replaced. The 86 Bumper Kit takes care of your gap plus eliminates the need to remove the Side Marker Lights…they can stay put to save you time and frustration of dealing with the metal clips each time the bumper is removed. Simply push two buttons on each side and remove your screws and plastic clips from under the hood and underbody, disconnect a few wire connections, and you’re done

ft86 sample ft86 sample 3 FT86 QRK Billet FT86 QRK 1 ft86 sample 2 ft86 black on black

The Move Over Racing 86 Bumper Quick Release Kit installs in less than 1.5 hours with a difficulty of 5/10. Step-By-Step Instructions are Included with Kit

Tools Required are:

  • Drill with 7/8″ Stepped Drill Bit and 1/4″ Drill Bit
  • Dremel with Cutting Blade for Plastic
  • Plastic Measuring Tape or Digital Caliper
  • Needle Nose Pliers
  • Flathead Screwdriver (Large and Small)
  • Phillips Screwdriver – Stubby
  • 10mm wrench x 2
  • 10mm Socket and Ratchet with Long Extension
  • Punch and Hammer
  • Painters Tape
  • Grease or Similar to Mark Location of Latch Holes
  • Marker
  • Loctite
  • Touch-Up Paint
  • It is Recommended to Remove Front Wheels with Car Jack and Stands

This is a great mod for guys who track their BRZ/FRS or for the everyday driver who removes the front bumper often for mods etc while taking care of any misalignment in the fender to bumper attachments- this kit is a must have for 86 owners!  The 86 Bumper kit utilizes the OE fender brackets to mount our Pin Assembly and Custom Stainless Spacers that are adjustable for the rear latch. The front latch requires one 1/4 inch (0.250″) hole on each fender bracket is to mount

Dual latches on each side of the bumper keep everything lined up and held on tight with over 250lbs of holding force in each latch! They are made from 6061 T6 Aluminum. Mounting Pin Assembly is made from 304 and 316 Stainless Steel. More info and pics coming your way soon!

Contact moveoverracing@gmail.com